 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BCM1115 (R) SINGLE-PORT VOICE OVER IP ETHERNET CPE ENGINE FEATURES SUMMARY OF BENEFITS * The BCM1115 is the most highly integrated silicon solution for mid-range 1-Ethernet port Voice over IP Enterprise Phone and Ethernet Residential Gateway applications. * The BCM1115 integrates: * 100-MHz MIPS32 CPU (110 DMIPS) with 8 KB of I-cache and 4 KB of D-cache * Superscalar 108 MHz ZSP DSP with dual-MAC (216 MIPS), 48 KB of instruction RAM and 32 KB of data RAM * One 10/100BASE-T Ethernet PHY with in-line power over Ethernet support * Two wideband audio DACs and ADCs * 9x9 keyscan controller * Ethernet status LED driver * TDM IOM-2(R) port * Two UARTs * Two high-speed serial ports * General purpose I/O * Interrupt control unit * DMA support unit * SDRAM interface * External Bus Interface * EEE 1149.1 (JTAG) * 0.18u process technology, 1.8/3.3 V * 87.5 MHz MIPS32 CPU and 108 MHz DSP Support * In IP phone applications - VxWorks(R) Operating System - SIP, H.323, H.248/Megaco, and MGCP - G.711, G.726, G.729A/AB, G.723.1/A, G.722.1 and BroadVoice(R) - Full-duplex speakerphone operation - Handset echo suppression - Two- and three-channel conferencing - Enhanced Packet Loss Concealment - Paging (via a G.711 channel) - User application software * In VoIP gateway applications - VxWorks Operating System - SIP, H.323, H.248/Megaco, and MGCP - G.711, G.726, G.729A/AB, G.723.1/A, and BroadVoice - Line echo cancellation - Conferencing support - Enhanced Packet Loss Concealment - User application software 10/100BASE-T Ethernet MAC and PHY * * Integrates support for Modified Link Pulse in-line power specification * Compliant with 802.3af power over Ethernet standard * Provides auto-MDI/MDIX, enabling the use of straight or crossover cables in either port * Wideband Audio CODECS * Enables support of emerging wideband vocoding standards * 0.95W peak, 0.3-0.8W standby modes * 256-pin PBGA package enables 4-layer PCB designs * Pin and Software compatible with BCM1101, BCM1112, BCM1113, BCM1113R, and BCM1115R ICs HARDWARE PLATFORMS * BCM91101 Reference Platform * Complete Ethernet IP phone reference design in phone plastics * BCM91112SMTA Reference Platform * Ethernet Residential Gateway reference design OVERVIEW Master SPI Port UART 0 UART 1 18 GPIOs External Interrupt Controller Keypad Scan Controller [or 18 GPIOs] Peripheral Bus IPB Bridge Watchdog Timer Timers MIPS JTAG MIPS32 CPU + 8K I-Cache + 4K D-Cache High Speed Serial Port 2 100-MHz CPU System Bus High Speed Serial Port 1 TDM (IOM-2) Port 50-MHz External Bus Interface Analog Processor Module CODEC Channel 2 CODEC Channel 1 16-bit D/A 16-bit A/D 48 KB of Program Memory ZSP JTAG ZSP DSP 32 KB of Data Memory Flash/ EPROM 10/100BASE-T Auto-MDIX PHY 10/100BASE-T Ethernet MAC 802.1p/Q support SDRAM Interface SDRAM Ethernet LED Driver DMA Arbiter Broadcom's BCM1115 is designed for use in cost-sensitive, single Ethernet port consumer and Enterprise IP Phone and Gateway products. Key modules integrated in the BCM1115 include: * MIPS32TM 100-MHz processor with 8K 2-way set associative I-cache and 4K 2-way associated D-cache. This MCU supports the VoIP protocol stacks, VxWorks operating system, and customer application software. Programming is done in C, on top of Broadcom's object-oriented signal processing API. * ZSP 87-MHz DSP with 48-KB instruction and 32-KB data RAM. The DSP can support narrowband voice communication using G.711, G.726, G.723.1/A, G.729A/AB, or BroadVoice16TM, and wideband communications using G.722 or BroadVoice32TM. Full-duplex speakerphone capability is supported in conjunction with any of these voice compression techniques for IP Phone designs. The DSP also supports enhanced Packet Loss Concealment, Jitter Buffer, fax relay and telephony algorithms e.g., DTMF and Call Progress Tones). * Analog codecs: Two integrated analog CODECs capable of supporting both narrowband 8 Kilohertz (KHz) and wideband 16 KHz sampling, which, in conjunction with wideband voice coders, such as Broadcom's BroadVoice32, will enable IP phone networks to deliver high fidelity voice transmission. * 10/100BASE-T Media Access Controller and Transceiver. The Media Access Controller (MAC) supports 802.1p prioritization of voice packets and 802.1Q VLAN support for segmenting physical networks into multiple logical networks. The transceiver performs all of the functions for 100BASE-T Ethernet in full- or half-duplex mode over Category (CAT) 5 twisted pair cabling and 10BASE-T Ethernet in full- or half-duplex mode over CAT 3, 4, or 5 twisted-pair cable. The PHY also supports auto-MDI/MDIX detection to allow the use of any cable type. The transceiver integrates support for in-line powering over Ethernet. Broadcom(R), the pulse logo, Connecting everything(R), the Connecting everything logo, BroadVoice(R), BroadVoice16TM, and BroadVoice32TM are trademarks of Broadcom Corporation and/or its affiliates in the United States, EU and/or certain other countries. Any other trademarks or trade names mentioned are the property of their respective owners. (R) BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 (c) 2005 by BROADCOM CORPORATION. All rights reserved. 1115-PB05-R 02/01/05 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: info@broadcom.com Web: www.broadcom.com |
Price & Availability of BCM1115
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |